Neue TyreON TPAL42 mobile double 4 post parking lift for car - 4.2T - Height 4-Säulen-Hebebühne

The price is excluding VAT and delivery costs.
Capacity 4000 kg
Drive-up height 12,5 cm
Lifting height 188 cm
Free height 180 cm - below the platform
Runways L = 415 cm / W = 47.5 cm
Height of the posts 219 cm
Width 460 cm - between the posts
Width 267 cm - outside posts
Width 486,4 cm - with controller + pump unit
Required length Approx. 450 cm without the separate ramps
Surface Hardened, 10 cm - C20/25
Lifting / lowering time 50 / 30 sec.
Motor power 2,2 kW - C16A fused (230V)
Extra safe The loading platform can only be lowered if a lever is first turned to release the safety hooks
► Industrial (alu) motor with cooling fins and fan
► Automatic car rear side roll-off protection - 4 hinged short ramps
► Car fontside roll-off protection - 4 stop plates
► Hydraulic overload valve
► Hydraulic lifting cylinder under the runway
► Cable break protection - mechanical locks in each column, every 10 cm
► Foot protection brackets on the sides of the runways
► Safe 24V controller with up and down buttons
► Height limit switch
► Mechanical synchronization control with steel cables
► Diamond profile on runways and ramps
Delivery includes 4 separate ramps, 4 hinged ramps, 4 stop plates, 8 wheel chocks and 3 plastic collection trays
Colour - powder coating RAL 7016 anthracite grey
Voltage 230V
Packaging 4 post parking lift L465 x B54 x H165 cm - 1400 kg
Hydraulic oil is not included 10 L HV-ISO-32 is optional
This double parking lift for car is characterized by simple installation and simple operation. Fits any group in the fuse box with a 16 Ampere (230V) connection value.
Obviously protected against overload so that the hydraulic parking lift is not damaged in the event of a too heavy vehicle.
TyreON presents hinged short ramps used in combination with separate ramps, leaving behind old systems with horizontal ramps that cause people to bump their heads.
At the rear hinged ramps that fold down when the four post parking lift is raised, so cars are protected from rolling off at the rear side.
There are four stop plates at the front of the four runways for this purpose.
The ramps and the stop plates for the front wheels of the car can be used on both sides of the runways.
This means that one can choose: The control unit on the right column at the ramps or diagonally opposite on the left column, on the driver's side of the car.
WK4
wheel kit (€140,-)
DT3
6 plastic drip trays (€120,-)
PJA1
2 steel platform for jack/tools(€200,-)
Prices excl. VAT
Removable ramps are placed on the ground to drive on and off
The long ramps are easy to carry and also suitable for vehicles with a low ground clearance.
The parking lift can be placed loose on a hardened flat surface. The floor plates are provided with anchoring holes but securing is not necessary.
24V controller up and down - Safety-foot-brackets on runways
The 24V controller operates the hydraulic pump, which drives one hydraulic cylinder for lifting and lowering.
To prevent any unintentional descent, the 4 columns are equipped with a lock every 10 cm.
The loading platform can easily be levelled as the height of the locking grilles, on each post, is adjustable.
Safety-brackets have been mounted on the side of both runways for foot protection.
Reduce width by 20 cm - TyreON CK2
As standard, the pump unit and controller are mounted on the side of the parking lift and the total width is then 486,4 cm.
The total width is reduced by 20 cm with the optional TyreON CK2 conversion kit. This consists of two right-angled steel plates to rotate the pump unit and the controller a quarter turn.
conversion kit: €50,- excl. VAT
TPAL42 mobile double 4 post parking lift for car - 4.2T - Height 188 cm - Long 415 cm runways with automatic roll-off protection - 230V - To park 4 vehicles