MAN D2676LE423 (i6-800) marine engine Motor für MAN
Hörsching7279 km to "United States/Columbus"
Wenn Sie sich entschließen ein Material zu einem niedrigen Preis zu kaufen, stellen Sie sicher, dass Sie auch mit dem tatsächlichen Verkäufer in Kontakt sind. Holen Sie sich möglichst umfangreiche Informationen über den Anbieter ein. Eine Betrugsmasche ist, dass sich der Anbieter als tatsächlich existierende Firma ausgibt. Wenn Sie Bedenken haben, informieren Sie uns über das Feedback-Formular, damit wir eine zusätzliche Kontrolle durchführen.
Bevor Sie sich entschließen einen Kauf zu tätigen, sehen Sie sich verschiedene Verkaufsangebote an, damit Sie den handelsüblichen Durchschnittspreis feststellen können für das Angebot, das Sie ausgewählt haben. Sofern der Preis des Angebots, das Sie sich ausgesucht haben, wesentlich niedriger ist, überprüfen Sie noch einmal Ihre Kaufabsicht. Eine große Preisdifferenz ist oft ein Hinweis auf versteckte Mängel oder einen Betrugsversuch des Verkäufers.
Kaufen Sie keine Produkte, bei denen der Durchschnittspreis bei vergleichbaren Angeboten zu stark abweicht.
Stimmen Sie keinen zweifelhaften Angeboten zu und auch keinen Vorauszahlungen. Sofern Sie Bedenken haben, zögern Sie nicht alle Details zu klären, nach weiteren Bildern zu fragen sowie nach Unterlagen für das Material, prüfen Sie die Echtheit der Dokumente und stellen Sie Fragen.
Dies ist die häufigste Betrugsmasche. Unlautere Verkäufer verlangen einen gewissen Betrag als Vorauszahlung, damit das Material für Sie "reserviert" wird und Sie anschließend den Kauf tätigen können. Dadurch können Betrüger große Beträge einkassieren und dann spurlos verschwinden.
- Bezahlung per Vorkasse mit Kreditkarte
- Leisten Sie keine Vorauszahlung ohne Dokumente, die die Überweisung bestätigen, sofern bei der Kommunikation mit dem Verkäufer bei Ihnen Bedenken aufgetreten sind.
- Überweisung auf ein "Treuhänder" Konto
- Eine solche Anfrage ist alarmierend und weist meist darauf hin, dass es sich um einen Betrüger handelt.
- Zahlung an ein Firmenkonto mit einem ähnlichen Firmennamen
- Seien Sie vorsichtig, Betrüger geben sich oft als bekannte Firmen aus und ändern nur geringfügig den Firmennamen. Überweisen Sie kein Geld, sofern Sie den geringsten Zweifel am Firmennamen haben.
- Änderung von eigenen Daten in der Rechnung einer tatsächlich existierenden Firma
- Bevor Sie eine Banküberweisung vornehmen, vergewissern Sie sich, dass alle Angaben korrekt sind und diese mit der betreffenden Firma übereinstimmen.
Kontaktdaten des Verkäufers
+358 50 53...
Anzeigen
+358 50 5345498
+358 9 231...
Anzeigen
+358 9 23165797
Österreich 
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Italien, Calenzano (FI)
Österreich, Hörsching
Belgien, TEMPLOUX
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215