Krauss Maffei 2700-12000MX Spritzgießmaschine

stav: Good
KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm
MC5 controll
Clamping Unit
* Clamping force: 27,000 kN / 2,700 t
* Mold opening force: 1,890 kN
* Moving platen force
opening/closing: 342 / 294 kN
* Platen dimensions: 3,020 × 2,600 mm
* Distance between tie bars (H × V): 2,100 × 1,700 mm
* Opening stroke: 3,000 mm
* Mold height min./max.: 900 / 2,000 mm
* Maximum daylight: 3,900 mm
* Ejector stroke: 400 mm
* Ejector force forward/backward: 400 / 200 kN
Injection Unit – SP 12000
Screw diameter: 120 mm
* L/D ratio: 23
* Maximum injection pressure: 1,758 bar
* Stroke volume: 6,786 cm³
* Shot weight PS: 6,175 g
* Injection flow rate: 1,118 cm³/s
* Screw speed nominal/max.: 100 / 141 rpm
* Plasticizing rate PS at nominal speed: 169 g/s
* Plasticizing rate PE at nominal speed: 131 g/s
* Plasticizing rate PS at maximum speed: 239 g/s
* Plasticizing rate PE at maximum speed: 184 g/s
* Nozzle contact force: 166 kN
Electro-Hydraulic Equipment
* Pump motor rated power: 132 kW
* Installed heating capacity: 84 kW
* Barrel heating/control zones: 7
* Dry cycle rate according to Euromap 6: 356 cycles/h
* Dry cycle time according to Euromap 6: 10.1 s
* Oil tank capacity: 2,440 l
Dimensions & Weight
* Net weight incl. control cabinet: 168 t
* Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m
* Maximum mold weight: 72,000 kg
With Electric Screw Drive
* Screw drive power: 147 kW
* Screw speed nominal/max.: 100 / 158 rpm
* Plasticizing rate PS nominal: 178 g/s
* Plasticizing rate PE nominal: 137 g/s
* Plasticizing rate PS maximum: 267 g/s
* Plasticizing rate PE maximum: 206 g/s
With Accumulator (ZE)
Injection flow rate: 1,696 cm³/s
Equipment
4 cores hydraulic - moving platen
16 hydraulic cascades
6 pneumatic cascades
Hotrunnrer controllers: 48
removable tie bar
Software for Extrusion