Caterpillar MWM Motor für Caterpillar MWM TCG2020V16
Hörsching7279 km to "United States/Columbus"
Wenn Sie sich entschließen ein Material zu einem niedrigen Preis zu kaufen, stellen Sie sicher, dass Sie auch mit dem tatsächlichen Verkäufer in Kontakt sind. Holen Sie sich möglichst umfangreiche Informationen über den Anbieter ein. Eine Betrugsmasche ist, dass sich der Anbieter als tatsächlich existierende Firma ausgibt. Wenn Sie Bedenken haben, informieren Sie uns über das Feedback-Formular, damit wir eine zusätzliche Kontrolle durchführen.
Bevor Sie sich entschließen einen Kauf zu tätigen, sehen Sie sich verschiedene Verkaufsangebote an, damit Sie den handelsüblichen Durchschnittspreis feststellen können für das Angebot, das Sie ausgewählt haben. Sofern der Preis des Angebots, das Sie sich ausgesucht haben, wesentlich niedriger ist, überprüfen Sie noch einmal Ihre Kaufabsicht. Eine große Preisdifferenz ist oft ein Hinweis auf versteckte Mängel oder einen Betrugsversuch des Verkäufers.
Kaufen Sie keine Produkte, bei denen der Durchschnittspreis bei vergleichbaren Angeboten zu stark abweicht.
Stimmen Sie keinen zweifelhaften Angeboten zu und auch keinen Vorauszahlungen. Sofern Sie Bedenken haben, zögern Sie nicht alle Details zu klären, nach weiteren Bildern zu fragen sowie nach Unterlagen für das Material, prüfen Sie die Echtheit der Dokumente und stellen Sie Fragen.
Dies ist die häufigste Betrugsmasche. Unlautere Verkäufer verlangen einen gewissen Betrag als Vorauszahlung, damit das Material für Sie "reserviert" wird und Sie anschließend den Kauf tätigen können. Dadurch können Betrüger große Beträge einkassieren und dann spurlos verschwinden.
- Bezahlung per Vorkasse mit Kreditkarte
- Leisten Sie keine Vorauszahlung ohne Dokumente, die die Überweisung bestätigen, sofern bei der Kommunikation mit dem Verkäufer bei Ihnen Bedenken aufgetreten sind.
- Überweisung auf ein "Treuhänder" Konto
- Eine solche Anfrage ist alarmierend und weist meist darauf hin, dass es sich um einen Betrüger handelt.
- Zahlung an ein Firmenkonto mit einem ähnlichen Firmennamen
- Seien Sie vorsichtig, Betrüger geben sich oft als bekannte Firmen aus und ändern nur geringfügig den Firmennamen. Überweisen Sie kein Geld, sofern Sie den geringsten Zweifel am Firmennamen haben.
- Änderung von eigenen Daten in der Rechnung einer tatsächlich existierenden Firma
- Bevor Sie eine Banküberweisung vornehmen, vergewissern Sie sich, dass alle Angaben korrekt sind und diese mit der betreffenden Firma übereinstimmen.
Kontaktdaten des Verkäufers
+358 50 53...
Anzeigen
+358 50 5345498
+358 9 231...
Anzeigen
+358 9 23165797
Österreich 
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Finnland, Helsinki
USA
Niederlande, Ven-Zeldenheide
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
Österreich, Hörsching
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation
el.power 1560kW 10500V 50Hz new TPEM
heat utilization temp.power 1597kW
alternator Marelli MJH560LA4 or similar
Genset MWM TCG2020 V16
Technical data
1560 kWel; 10500 V, 50 Hz; Natural gas, MN = 80
Engine / Configuration code:
TCG 2020 V16
R
Speed / Mean piston speed:
[1/min] / [m/s]
1500 / 9.8
Configuration / number of cylinders:
[ - ]
V / 16
Bore / Stroke / Displacement:
[mm]/[mm]/[dm3]
170 / 195 / 71
Compression ratio:
[ - ]
13
Mean effective pressure:
[bar]
18,2
Mean lube oil consumption at full load:
[g/kWh]
0,15
Generator:
Marelli MJH 560 LA4 or similar (*)
Voltage / voltage range / cos Phi:
[V] / [%] / [-]
10500 / 10 / 1
Speed / frequency:
[1/min] / [Hz]
1500 / 50
Engine Parts
3
Engine configuration
3
Basic parts
3
Exhaust gas system
3
Exhaust Gas Outlet vertical
3
Exhaust turbo charger
3
Gas mixture pipe
3
Cooling system on cylinder rows A or B, horizontal
3
Torsional vibration damper
3
Fly wheel
3
Fly wheel casing
3
Starter equipment, electric with double starter and temperature cut-off
3
Engine Mounting
3
Lube oil system
3
Gas mixer
3
Suction system Standard
3
Crankcase ventilation
3
Primer and Topcoat Engine - Primer
3
Conservation
Exhaust Gas Outlet
3
Exhaust Gas Outlet vertical
Engine Control
3
Control without ExhaustTurboCharger speed monitoring / without control exhaust wastegate
Pre-Lubrication
3
Pre lubrication 230 / 400 / 460 V
Engine Test
3
Engine acceptance test without customer participation
Tools for commissioning and assembling
1
Tool Kit small scope for commissioning and assembling
Spare Parts for New Engines
3
without spare parts for new installation
Genset Parts
3
Genset defintion
3
Generator - Marelli - MJH 560 LA4
3
Base frame with integrated oil tank
3
Elastic genset mounting
3
Elastic coupling
3
Fasteners
3
Crankcase ventilation
3
Pre Lubrication Genset - V
3
Lubeoil level monitoring
3
Additional parts for lubrication system 230 V/50 / 60 Hz
3
Warning sign for oil cooler
3
Suction pipe
3
Air filter with air preheating
3
Water circuit components for air preheating
Primer and Topcoat for Genset
3
Primer and Topcoat for Genset - RAL 5010, gentian blue
Name Plates for Complete Engine
3
Name Plates for Aggregate in Russian
Fuel System
Zero-Pressure Gas Control Train
3
Gas train DN 65/65/65 - with seal monitoring unit
Connecting Accessories for Zero Pressure Train
3
Compensator for gasconnection
3
Connection Accessories for Gas Train DN 65 - Steel
Electrical Preheating
3
Electric Preheating - 400 / 480 V / 9 kW / with flanges
3
Counter Flange Set DN 80
Sensors
3
Exhaust back pressure sensor
Genset Management (TEM)
Base System
3
TEM - Basic Cabinet (ST20F-F)
3
TEM packaging in wooden crate (VER)
Power Plant Control System
3
Inlet air preheating (AVW)
Interface
3
Modbus RTU (MRTU)
3
Analog speed setting (ASD)
Hardware
3
I/O Controller (IOC) (included in Base system)
3
Operating terminal (BRT)
3
wall switch cabinet, Height 1200mm door hinge right (AE0R)
3
Console (KBW)
3
Cable entry from above (KEO)
3
TEM connecting cable set 15m (K20ARM15)
Documentation
3
Documentation first language - standard documentation